Vive Health Lead Electrodes (2" x 2") - 10 Sets of 4
SAFE REPLACEMENT PADS
Continue pain-relieving treatments with FDA approved replacement electrode pads
UNIVERSAL COMPATIBILITY
Pigtail 2mm stud or snap connector is compatible with most TENS, EMS and muscle stimulation devices
PREGELLED AND SELF ADHESIVE
Pregelled with a conductive hydrogel, the pads easily secure to the skin without leaving a sticky residue following each treatment
FLEXIBLE SQUARE PADS
Square electrode pads are constructed with a non-woven cloth backing that is flexible for optimal placement
LATEX FREE
Latex-free and PVC-free, the non-irritating electrode pads are safe for all skin types
REUSABLE 10 SETS OF 4
Each set of four includes a protective liner in the resealable pouch for safe storage
Features
Enhanced Pregelled Pads: Medically tested formula
Flexible and Reusable: Durably made for multiple treatment sessions
Universally Compatible: With most lead style TENS, EMS and muscle stimulation devices
Safe and Effective: Easily replace worn out TENS electrode pads
Uses
Replacement electrode pads for TENS, EMS and muscle stimulation devices
Material
Non-woven cloth backing
Conductive carbon film (Low impedance)
Conductive hydro gel
Lead wire with 2mm DIN size or snap connector
How To Use
Read the device user manual thoroughly before use
Skin must always be clean, dry and free from lotion or powders
Attach lead wires to electrodes before applying to skin
Remove the protective backing from the electrode. Save for future use
Apply the electrode to skin, center first, then smooth down the edges
Attached the lead wires to the device and turn it on. Adjust the settings according to treatment plan. Do not exceed intensity of .1 Watt/cm2
When treatment is complete, turn the device off
Lift the electrode at the edges and peel to remove from skin
Care Instructions
Replace the saved backing on the sticky side of the electrode
Disconnect the device from the lead wires and electrode
Store the electrode in the original packaging
Keep electrodes away from direct sunlight
If the electrode loses adhesion properties, gently rub one or two drops of water onto the gel surface to reactivate the adhesion. If that does not work, discard the electrode
Discard the electrode in the original packaging after 20-25 uses
Includes
10 Sets of 4 Replacement Electrode Pads with Lead Connectors